description:

The emergency fixture with sensor works under normal supply of AC power, it has 7 adjustable levels of memrgency watts (3.6w, 6w, 10w, 12w, 15w, 17w, 20w set by SET button). Emergency time can be 90 min, 2, 3, 4, 5, 6 hours or customized ; when it works with microwave sensor , it will 100% light on . when movement object gets close (sensor distance is 3-12meter(can be set by jumper), and sensor angle is 120-160degree), and switch to 20%(default value) twilight when movement object leaves after 5s, 30s, 90s, 3 min(can be set by jumper); when AC normal supply shortage the emergency fixture to battery powersupply to keep light on . At the same time , microwave sensor still detect object movement , if no movement detected , the lighting will switch to 3.6w-20w ememrgency . The emergency fixture with sensor can also work as led sensor fixture(remove the battery pack) or as work as led normal waterproof fixture (remove the battery pack and sensor ). It's widely used in tunnel , railway station , metro station , supermarket , stair well, corrodor, envacuation passage,especially parking lots. 

features:

1. Adopt high grade PC base and PC cover fitting , good quality seal fpr better waterproof , high transmittance frost cover (>88%), IP65 protection rate.

2. Option of microwave motion sensor with standby lihgt operating at 20% brightness for both standby & emergency versions.

3. 2 hours battery operation in emergency via high temperature Ni-CD or Ni-MH battery.

4. Using high brightness SMD 2835/5630 led chips aslight source

5. microwave motion sensor range up to 8m

6. Flexibility to set motion sensor time for full light output to either 10s, 30s , 90s or 3 minutes.

7. Emergency watts adjustable 7 levels , 3.6w-20w.

8. Emergency duration : 90min , 2h , 3h , 4h .... or depend on sensor occupy

9. Available in 2ft 20w . 4ft  36w  and 5ft 44w

10. Approved by CE ROHS SAA abd C-Tick (RCM) and AS2293.3

11. 3 years warranty

Application:

Parking lots

railway station

supermarkets

school, college, uinversity

factories and offices

commercial complex 

Technical Specifications for series type:

details:

 certification:

Sensor setting

           The sensor is innovative and avtive motion detectors with HF systerm 5.8GHz.Motion can be detected through plastic, glass and thin non-metal materials. The sensor allows energy saving without compromising confort. When used in conbination with our LED fitting. Fitting can achieve several steps dimming function. Which is perfect for using in some areas the requires a light change notice before totally switch off.

Features

1. Automatic dimming when used in combination with our LED fitting (specify models).

2. Built in adjustable twilight ratio.

3. Detection area, time dedaly and twilight ratio can be set via DIP switvh.

4. Wide detection area , range up to 16m in diameter.

2-step dimming funtion (Match with fitting)

   The sensor can provide 2-step dimming funtion , 100%-->twilight (20%)-->switch off(0% or keep on at very low illumination level). They are particularly for using in corriors, stairwells and undergroud passages where low light levels are maintained until motion is detected.

Installation:

 Packaging

 About us

   Shen Zhen comled electronic technology co.,ltd is a professional led lighting manufacture in shen zhen ,china. We have six years experience in making led lights , focusing on making C-Tick ,SAA, UL led lightings.

Our quality

1.With six years LED lightings technical experience , we used only the best quality components to ensure the standard of our products range is of the highest caliber

2. All products we sold out are strictly and tested by our Qc department

3.All products have approved SAA C-Tick certification

Warranty

Q1: What is the waranty for lamps ?

       For the lamps , we have 3 years warranty . If any quality problems on our side occured in this period , we will take on the shippings cost and replacement.

Q2: What is the CRI?

       CRI is a figure which faceback the real colors CRI with higher cost .For led tubes , the CRI is mostly 75-80Ra. But there are some suppliers write a high data to attract clients. Please note.

Q3: What is your battery lifespan?

       300-500times of charging & recharging cycles.

Q4: How dose your factory do regarding quailty control?

       Quality first, we always atach great importance to quality controlling from the very begining to the very end. Our factory has gained SAA C-Tick CE UL RHOS authentication.

Q5: Is there cheap shipping cost to import to our country?

       For small order, express will be best, and for bulk order, sea ship way is best but take much time. For urgent order, we suggest via air to airport.

Q6: Can we get support if we have our own market position?

       Please inform us your detailed mind on your market demand. We will discuss and propose helpful sugestion for you to find the best solution for you.

Q7: Where is your factory located? How can I visit you?

       Our factory is located in shenzhen city, china. You can fly to shenzhen airport directly. All our clients from home or abroad are warmly welcome to visit us.